Laurels

Best Drywall Contractors
2022

The Best Drywall Contractors
Here Are The Top Drywall Contractors
The Andersen Companies

The Andersen Companies

The Andersen Companies are general contractors with offices in Fairfield, NJ, Palmetto, FL, Ocala, FL, and Orlando, FL. It is a premier east coast commercial subcontractor, specializing in walls, ceilings, and high-end architectural millwork. This company is an expert in drywalls, interior systems, and architectural woodworking. The Andersen Companies have been certified by the Architectural Woodwork Institute for having quality woodwork.

Fairfield, NJ 07004

Website

Website
Gruppo 5 Subpartners, Inc.

Gruppo 5 Subpartners, Inc.

Gruppo 5 Subpartners, Inc. is a general contractor that is located in Long Island City, New York and was established in 2010. Specialties include construction and development, general contracting and management, ground-up construction, concrete and masonry, carpentry, drywall and ceilings, stone and tile, and more. Gruppo 5 Subpartners, Inc. works with clients like Gucci, Giorgio Armani, Fendi, Sprint, Payard, Auntie Anne’s, and more.

Long Island City, NY 11101

Website

Website
Tapingwalls.com

Tapingwalls.com

Tapingwalls.com is a locally operated business offering drywall services to home and business owners in New York and the surrounding areas. With over 40 years of collective experience, the technicians on staff can help with new installations as well as drywall painting, taping, and repair. Their drywall repair solutions cover popping nails, wallpaper removal, wall and ceiling cracks, damaged corner beads, worn-out paint, and popcorn ceiling removal. The technicians also provide solutions for water-damaged drywall and ceilings along with sheetrock installation.

Staten Island, NY 10314

WebsiteInstagram

Website
Union Building Services US, Inc.

Union Building Services US, Inc.

Union Building Services US, Inc. is a building maintenance contractor that is located in Wayne, New Jersey with over 10 years of experience in providing expert services. Union Building Services was founded in 1980 as a janitorial services company and then in 2004 was revamped to become a full-fledged general construction company. Specialties include commercial/ industrial construction, residential construction, retail store display, renovation, janitorial services, and snow removal. This company also deals in masonry, carpentry, drywall installation, electrical, plumbing, HVAC services, flooring installation- marble, tile, wood, carpet, laminate, and painting. Union Building Services US, Inc. offers free consultations.

Wayne, NJ 07470

Website

Website
Quiet Zone Soundproofing & Construction NYC

Quiet Zone Soundproofing & Construction NYC

Quiet Zone Soundproofing & Construction NYC is the premier provider of world-class soundproofing and construction solutions in New York City, New York. The installation teams have received in-depth training and education in the correct methods and precise installation procedures required for each of the soundproofing and sound-isolation materials, such as soundproofing and noise reduction drywall, acoustical insulation, acoustical ceilings, acoustical panels, drywall, carpentry, mass loaded vinyl sound control barrier, and more. This is an EPA Lead- Safe Certified Firm. Quiet Zone Soundproofing & Construction NYC was featured in The New York Times.

New York City, NY 10036

Website

Website
Rivco Construction Corporation

Rivco Construction Corporation

Rivco Construction Corporation is a construction company that is located in the Bronx, New York and was established over 20 years ago. This company specializes in millwork, drywall, acoustical ceilings, rough carpentry, and more. Rivco Construction Corporation is highly experienced in metal stud framing, drywall installation and finishing, insulation, gypsum reinforced fiberglass columns and panels, metal column enclosures, shaft walls, access panels, lead lined and bullet resistant rock. Its carpenters are extremely skilled and handpicked.

Bronx, NY 10451

Website

Website
Mulcahy Ceilings & Drywall

Mulcahy Ceilings & Drywall

Mulcahy Ceilings & Drywall is a ceiling and drywall contractor that is located in Rochester, New York. Services include textured ceilings, sunbursts, stress crack repair, water damage repair, plaster repair, full painting, insurance work, drywall finishing, new installations, and remodeling. Mulcahy Ceilings & Drywall is a 2015 Angie’s List Super Service Award Winner and is affiliated with Sherwin Williams.

Rochester, NY 14612

Website

Website
Paint Works New York

Paint Works New York

Paint Works New York is a full-service painting contractor that is located in Astoria, New York. It is the go-to commercial painter in Brooklyn and Manhattan. Whether anyone is looking for a Manhattan painter or a drywall repair contractor, Paint Works can help them with multiple types of interior restoration. Because of its attention to commercial painting laws, this company is proudly recognized by the EPA as a Certified Lead-Safe Firm. Paint Works is also a member of the Painting and Decorating Contractors of America, is a PDCA Accredited Contractor, and has won the Angie's List Super Service Award for 6 years in a row.

Astoria, NY 11106

Website

Website
JP Interiors, Inc.

JP Interiors, Inc.

JP Interiors, Inc. is a painting contractor that is located in Brooklyn, New York. Over the past 18 years, this company has crafted a unique and unrivaled methodology for implementing standards and procedures for getting what customers want the most. Specialties include spraying, taping and drywall, skim coating, finish and general carpentry, wall and ceiling repair, handyman and cleaning services, and more. This company is the 2015 Angie’s List Super Service Award Winner and is a Better Business Bureau accredited business. JP Interiors, Inc. has been featured on Houzz. JP Interiors, Inc. is a proud member of the Painting and Decorating Contractors of America.

Brooklyn, NY 11201

Website

Website
Elite Painting Services Plus, Inc.

Elite Painting Services Plus, Inc.

Elite Painting Services Plus, Inc. is a comprehensive, professional, fully licensed and insured painting contractor located in Malverne, New York with over 20 years’ experience. Specialties include interior painting, exterior painting, commercial painting, and drywall and spackle. This company provides free estimates. Elite Painting Services Plus, Inc. is the Best of Long Island Winner of 2015/2016.

Malverne, NY 11565

Website

Website

Expert Answers To Common Questions:

  1. Introduction
  2. How much do drywall contractors make?
  3. How do you become a drywall contractor?
  4. How much do contractors charge to hang and finish drywall?
  5. Do you tip drywall contractors?
  6. Can a painting contractor demolish drywall?
  7. Do drywall contractors do trim?
  8. Do drywall contractors need a license?
  9. Is it better to install drywall horizontally or vertically?
  10. What is the difference between a general contractor and a drywall contractor?
  11. How do you plan a drywall project?
  12. What tools are needed to complete a drywall installation?
  13. What steps are there to a drywall installation? 
Q: Introduction
A:
Drywall contractors add the finishing touches to a home or business' new construction or renovation project. These professionals attach sheets of drywall to the studs that form the framework of inner walls to create the wall. They typically also finish seams between sheets of drywall so everything is smooth and ready to paint.

In addition to hanging drywall on walls, some drywall contractors also finish ceilings and apply decorative spackling. Most of the work performed by this type of contractor needs to be covered over to complete an interior renovation project. This might be done with either paint or a layer of wallpaper.
Q: How much do drywall contractors make?
A:
The median pay for a drywall installer is $48,830 per year. This breaks down to an average hourly wage of $23.47 for drywallers who work 40 hours a week year-round. Drywallers who offer specialized services, such as taping, earn a slightly higher average wage.
Q: How do you become a drywall contractor?
A:
On-the-job training is the typical route to becoming a drywall contractor. This can be done as part of an apprenticeship program or in a less formal work setting. Drywall contractors who own their own businesses might also take business management courses.
Q: How much do contractors charge to hang and finish drywall?
A:
Contractors charge either by the sheet for drywall projects or by the foot for custom projects. It typically costs around $30 to have each sheet of drywall installed. Custom drywall jobs are charged at around 50 cents per foot.
Q: Do you tip drywall contractors?
A:
Drywall contractors aren’t typically tipped for performing contracted work. However, if asked to perform tasks outside of the contract, it’s common to offer a tip for the additional services requested. It’s also okay to offer a tip if exceptional service was provided even if it isn’t standard to tip professionals in this industry.
Q: Can a painting contractor demolish drywall?
A:
Painting contractors don’t normally demolish drywall, but some contractors perform both services. Drywallers typically perform all the steps to get the wall ready for painting. Painters then take over and put the finishing touches on the walls.
Q: Do drywall contractors do trim?
A:
Drywall contractors don’t typically do trim unless they are also painters. This is because the trim is usually put in place after the paint has dried, and drywallers generally specialize only in installing and finishing drywall.
Q: Do drywall contractors need a license?
A:
Some states require drywall contractors to be licensed to work on either residences or commercial buildings. Some other states require drywall contractors to get a general license that covers both residences and commercial buildings. The individual installers who work for the contractors, however, don’t typically need to be licensed.
Q: Is it better to install drywall horizontally or vertically?
A:
The way drywall should be hung is based on the type of building in question. For residences, drywall should be hung horizontally. This requires fewer seams, hides uneven studs and makes it easier to finish the wall. For commercial buildings, drywall typically must be hung vertically to meet fire codes.
Q: What is the difference between a general contractor and a drywall contractor?
A:
A general contractor can work on almost any aspect of building or renovation while a drywall contractor typically only installs drywall. General contractors might do everything from framing to finishing, including adding interior decor elements. Drywallers are more likely to only do drywall and occasionally painting.
Q: How do you plan a drywall project?
A:
Take careful measurements. Sketch the area you plan to drywall, or use a computer program to calculate dimensions. Decide how to piece sections of drywall around doors and windows. Use these measurements to calculate how much sheetrock you need as well as how much seaming tape and spackle you need for the project.
Q: What tools are needed to complete a drywall installation?
A:
To complete a drywall installation project, you need tools for measuring, cutting, attaching, and finishing drywall. These include a drywall T-square, a jab saw, a utility knife, a drywall knife, a drill and drywall screws, drywall sanding sponges, and a sanding pole with sanding sheets.
Q: What steps are there to a drywall installation? 
A:
Six main steps are required to complete a drywall installation project. These steps include:
  1. Prepare the room: Get the room ready for drywall installation by clearing unnecessary things out of the way. If it’s a new building project, this might mean basics like sweeping debris out of the way or vacuuming dust out of outlet boxes. If it’s a renovation project, this can include decor elements. Remove things like trim and outlet covers as well as curtains.
  2. Hang the drywall: Measure the drywall using the drywall T-square and cut it to the desired size. Use the drywall screws and drill to attach the sheets of drywall to the framework. Be sure there’s a 1/2-inch gap along the floor line and 1/8-inch gap between each sheet of drywall. Additionally, stagger seams as much as possible.
  3. Tape the drywall seams: Apply mesh drywall tape over each seamline. Smooth the tape using a wide, flat drywall knife edge. Work with a small section of drywall tape at a time to avoid wrinkles in the tape. The tape needs to be as smooth as possible so it blends in and becomes invisible when you finish the wall.
  4. Apply joint compound coats: Use a drywall knife to spread one to three layers of joint compound over the drywall tape. With each layer, work to smooth the edges until it blends and there are no obvious lines where the tape attaches to the drywall. Finish inner corners by putting joint compound in creases and smoothing with the drywall knife. 
  5. Apply the skim coat: If there are any bumps or nail holes in the drywall, fill them with joint compound. After it has cured at least 24 hours, the level five finish known as skim coating can be completed. To do this, use painting gear to apply a diluted layer of joint compound then feather it out using a trowel or drywall knife. Skim coating can be performed on new drywall if there are damaged spots or to restore the appearance of older drywall.
  6. Prime and paint the wall: While priming and painting aren't standard parts of drywalling, they are required to finish the wall unless it’s being wallpapered or paneled. Check for rough spots and sand off anything that shouldn’t be there. Apply a coat of primer. Let it dry completely before painting the new drywall.