Best Electricians in Moreno Valley

Frequently Asked Questions

• Do I need an electrician to change a light fixture

  Replacing a light fixture is a relatively easy task, but it’s common for problems to arise during the installation. Homeowners frequently uncover existing wiring problems and unforeseen challenges while replacing fixtures, such as wires that are too short, mounting brackets that don’t fit the installation space, and electrical boxes that aren’t up to code. These issues can quickly complicate an otherwise simple project. Additionally, new light fixtures may require at least 10 feet of updated wire to prevent overheating. Electricians also have tricks for installing recessed lights and fixtures without damaging the drywall, which can make it even more worthwhile to consult a professional.

• Do I need an electrician to install a ceiling fan?

  Hiring a licensed electrician to install or replace a ceiling fan is often the best decision, especially for homeowners who aren’t well-versed in electrical codes and wiring techniques. Electricians can select the proper type of electrical box and brace to contain the wires and support the extra weight of the fan. Working with a professional is also helpful for preventing time-consuming mistakes and potential safety hazards related to improper materials or wiring.

• Do I need an electrician to install a thermostat?

  While many tech-savvy homeowners can install their own thermostat, hiring an electrician is a smart choice, especially when the wiring needs to be modified. Most programmable thermostats use a five-terminal setup that requires a common wire, or C-wire, to provide continuous power. These systems aren’t compatible with earlier two- and four-wire configurations. Additionally, improper wiring can prevent the HVAC system from running properly.

• What’s involved in adding more outlets to my house?

  Installing a new outlet involves permanently modifying a home’s electrical system, so a permit is required in most cases. Additionally, the installation must comply with wiring and placement standards established by the National Electric Code. For example, GFCI outlets are needed in all damp locations, and outlets on dedicated circuits require heavier wiring. The installation process may also involve removing a section of drywall to accommodate a new electrical box or drilling through an exterior wall to install a new outdoor power receptacle. Due to the complexity of each installation, it’s wise for homeowners to consult a licensed professional.

• What jobs require electrical permits?

  Building permits are required for any type of work that involves permanent modifications to a home’s electrical system, including installing new outlets, light fixtures, or circuit breakers. Low-voltage wiring systems for alarms and landscape lights also require permits. Homeowners who are unsure if they need a permit can consult a licensed electrician or ask their local building department. Some communities sanction homeowners to apply for permits while others will only accept applications from licensed contractors. Additionally, all covered work will be reviewed by a building inspector.

• Can I replace a circuit breaker myself?

  Replacing a circuit breaker is a fairly complex electrical repair. Usually, this type of work should be performed by an experienced professional who can accurately diagnose the problem and is familiar with wiring techniques and safety protocols. This project involves disabling all branch and main circuits and checking for currents before removing the faulty breaker. You also need to find an identical replacement circuit breaker. In most cases, breakers only need to be replaced if the contacts are worn or if they have been damaged due to arcing or electrical overloads. There’s also a chance that the problem could be caused by a short circuit, faulty bus bar, or defect in another part of the electrical system. A professional electrician can determine this for you.

• How long should a new circuit breaker last?

  In ideal conditions, circuit breakers should last for several decades. However, electrical overloads and building conditions can shorten a breaker’s lifespan. Breakers should be replaced if there are signs of physical damage, such as burn marks, damaged insulation, or melted wires. Breakers that trip repeatedly or won’t stay reset in the absence of overloads or short circuits may be nearing the end of their lifespan. Annual inspections can help to detect problems before they cause safety concerns.